PURPOSE To investigate the dosimetric characteristics of the new GMS BT-125-1 125 I radioactive seed, including dose rate constant, radial dose functions, and anisotropy functions. METHODS Dosimetric parameters of GMS BT-125-1 125 I seed including dose rate constant, radial dose functions, and anisotropy functions were calculated using the Monte Carlo code of MCNP5, and measured with thermolu...

PURPOSE To determine the relative dose rate distribution around the new (125)I brachytherapy source IsoSeed I25.S17plus and report results in a form suitable for clinical use. Results for the new source are also compared to corresponding results for other commercially available (125)I sources of similar design. MATERIAL AND METHODS Monte Carlo simulations were performed using the MCNP5 v.1.6 ...

The purpose of this study was to estimate the uncertainty in the dose distribution for the (125)I source STM1251, as measured with a radiophotoluminescent glass rod dosimeter and calculated using the Monte Carlo code EGS5 in geometry that included the source structure reported by Kirov et al. This was performed at a range of positions in and on a water phantom 18 cm in diameter and 16 cm in len...

In March 2004, the recommendations of the American Association of Physicists in Medicine sAAPMd on the interstitial brachytherapy dosimetry using I and Pd were reported in Medical Physics fTG-43 Update: Rivard et al., 31, 633–674 s2004dg. These recommendations include some minor changes in the dose-calculation formalism and a major update of the dosimetry parameters for eight widely used inters...

The post-implantation dosimetry for brachytherapy using Monte Carlo calculation by EGS5 code combined with the source strength regression was investigated with respect to its validity. In this method, the source strength for the EGS5 calculation was adjusted with the regression, so that the calculation would reproduce the dose monitored with the glass rod dosimeters (GRDs) on a water phantom. T...